50 Words or Less
The Fujikura Pro 2.0 and Pro 2.0 Tour Spec are consistent, mid-kick shafts that will fit a large percentage of golfers. Smooth kick, stable tip section.
Check out the 2024 Fujikura PRO Blue HERE
Introduction
While tip stiff “spin killers” are often the headline grabbers in the forums, they only fit a small percentage of golfers. For the vast majority who live in the middle of the bell curve, Fujikura has developed their new Pro 2.0. and Pro 2.0 Tour Spec. Both shafts feature upgrades that will boost club speed and decrease dispersion.
Looks
Both Pro 2.0 models feature clean branding and minimal graphics. The butt section is black with white branding on both versions. In the Tour Spec, the lower half is white – a hallmark of Fujikura’s Tour Spec family. The standard model shifts to grey with a ribbon of blue around the middle.
Feel
The Fujikura Pro 2.0 is a smooth, easy-to-load, mid-kick shaft. Whether you make your fairway finding swing or go 110%, you’ll feel the mid-section load in transition and deliver a powerful kick through the ball.
When you switch to the Pro 2.0 Tour Spec, you’ll feel the mid section tighten substantially. The feel is still consistent, but there’s less kick than in the standard version.
In both shafts, the tip is very stable. There’s no noticeable kick or torque-ing in the tip, even on very aggressive swings.
Performance
Thanks to their proprietary ENSO technology, Fujikura is on the cutting edge of shaft design. This has allowed them to build the Pro 2.0 shafts with a more effective loading zone for more club head speed. They’ve also increased the torsional stiffness by 14% to reduce spin and improve dispersion.
In my testing, I was very impressed with the consistently high ball speed I was seeing from both models. The Pro 2.0 felt like it was doing more of the work for me with its lively kick; the Pro 2.0 Tour Spec gave me the sense that I could swing as hard as I wanted without losing control.
For me, the biggest difference between the two shafts was the shot shapes they produced. With the Pro 2.0, I was hitting draws almost exclusively, hence the slightly lower launch and spin. With the Pro 2.0 Tour Spec, I was hitting more straight and cut shots. Either shaft could easily be a gamer for me, though I preferred the shot shaping flexibility of the Tour Spec.
The Fujikura Pro 2.0 is available in weights ranging from 57 grams to 77 grams and flexes from R2 (Senior) to X. The Fujikura Pro 2.0 Tour Spec is available in heavier weights – 67 to 87 grams – and only two flexes, stiff and X.
Conclusion
If you want a shaft that will give you a smooth feel and consistent results, ask your fitter to try the new Fujikura Pro 2.0 shafts. Whether you’re a smoother swinger, geared toward the Pro 2.0, or an aggressive hitter made for the Pro 2.0 Tour Spec, you’ll be impressed with the stability of the tip and predictable results.
He founded Plugged In Golf in 2013 with the goal of helping all golfers play better and enjoy the game more.
Matt lives in the northwest suburbs of Chicago with his wife and two daughters.
- Wilson DYNAPWR Carbon Driver Review - February 19, 2025
- SuperSpeed Speed Sticks Pro Review - February 18, 2025
- PING G440 MAX Driver Review - February 17, 2025
34 Comments
I’ve tried many different golf shafts in my time but I’ve always gone back to Fujikura. Quite frankly, they’re the best product for me and I’m sure for many who will give them a try.
How did these feel compared to the Fuji Evo II and III?
Zach,
The Speeder Evo shafts are much more lively than the Pro.
Best,
Matt
Hi Matt,
I have the stock Evo 2 665 TS in the XR 16 Pro. I’m averaging 1800 spin with 12° launch (head at 9°). Swing speed is 99mph.
My natural ball flight is a fade.
I’m looking for more spin (thus more carry).
Do you think the Tour version would be the better option?
Which is best for dispersion between the Pro 2.0 and Evo series? Are distances pretty even?
Thanks
Brandon,
There’s no way for me to give you a definitive answer. I would recommend going for a fitting and letting the fitter help you find that extra distance.
Best,
Matt
In the Fall I experienced a driver fitting. I was fit for the Fuji Pro XLR8. Now that spring has finally arrived I am ready to make a purchase. I read and compared the descriptions and specs of the Pro 2.0 with the XLR8. To me they seem almost the same.
Mid flex/kick, firmer/stiffer tip and butt sections. All the numbers are almost the same. Very confusing! Could you offer a comparison of the two shafts and maybe a general recommendation. I know I should probably go through another fitting but I am not eager to go through that again. Thank You.
Alan,
If you were fit for the Pro XLR8, I would recommend getting that. It will be quite different from the Pro 2.0 in that it’s counterweighted.
Best,
Matt
Hi Matt,
According to Fujikura the Pro 2.0 Tour Spec is rated for a swing speed of 105-120 MPH on the 6-S and the Pro 2.0 is for a swing speed of 90-105. What shaft did you use for the comparison ? 5, 6, or 7
I was surprised that both shafts in your Launch Monitor Date performed almost equal, even though the swing speed was only 101 on the Tour Spec ? What does that say about the recommendations from Fujikura ??
Marty,
I tested the 6.
What these results say about Fujikura is the same thing they would say about any shaft maker: their recommendations are only guidelines. Go read our Golf Myths Unplugged series. There are ZERO hard and fast rules about club fitting. Shaft makers put those recommendations on their site because there will always be people who refuse to make the smart choice and get fit by a professional.
Best,
Matt
How would the 2.0 TS compared to the new speeder TR ?
Patryk,
I haven’t tested the new Speeder TR, so I’m not sure how it will compare.
Best,
Matt
How does the Fuji Pro 2.0 play compared to the Tensei Pro Orange in terms of ease of launching the ball and has the active mid kick feel? And which plays stiffer? #SecretGiveaway
Afiq,
Both have stiff tips. To me, the Orange feels more active, but that may be a function of the counter weighting.
Best,
Matt
Interesting findings. I’m seemingly always stuck trying to find a shaft that is between an R flex and a S flex.
I’ve tried some Fujikura stuff in the past.
I’ve used Fujikura Vista Pro, and the R flex gave me nothing but hooks. Too soft. Tried an old Fujikura Vista Tour in S flex, but it felt a bit boardy.
I’ve got one driver with an old Fujikura e Fit On shaft 370 in an R flex. It actually feels decent, but that is likely because it is an aftermarket shaft that has lower torque and is probably around 75 to 78 grams.
#SecretGiveaway
I had a R7 TP 5 wood with a Fuji Vista Pro stiff and it was awesome and that R7 TP face was insane. I found one at a Dicks that someone returned (special order). Dicks never carried the TP versions. They threw it on the rack with a much higher price tag than the other R7 5 woods and it sat there until the R9 came out. I would visit it on my lunch break every couple of weeks while I browsed. Finally, they knocked almost $75 off from when it arrived and I got it. Must of had 4 or 5 price tags on it from the markdowns, lol. Even the grip was shot from sitting so long. Great 5 wood.
How would you compare the former pro tour spec to the new 2.0 pro tour spec? I got fitted with the old version with an M3 head but since the shaft is no longer available from Taylor Made they sent it with the 2.0. Only hitting it into the machine in the store the 2.0 felt stiffer but so limited I am wondering your thoughts. My ball speed is around 150.
Jeff,
I would agree with your feel. I think, generally, the newer Fujikura shafts have gotten a little stiffer than the previous versions.
Best,
Matt
Hey Matt,
Know you’re a big fan of the DI from your review. How would you compare the tour spec shaft to the DI? Does it load easier? Is the tip stiffer? Much Appteciated!
Dan,
You’re asking me to stretch back into my memory a bit. As I recall, the Tour Spec version felt stouter across the shaft than the DI.
Best,
Matt
Any idea about how it compares with the Fujicura XLR8 PRO
We have a full review of the Pro XLR8 here: https://pluggedingolf.com/fujikura-pro-xlr8-shaft-review/
Best,
Matt
Bought pro 2.0 5s as I wanted COUNTER BALANCED, lighter, lower torque shaft than my gamer EvenFlow blue 65.
Expected much lower swing weight than my gamer which is set to D1 but interestingly, SW turned out to be D5! How could this be possible with counter balanced shaft? Maybe I will have to dump weight on head or shorten shaft length by 1/2” after some range session.
Edward,
My first thoughts are A) shaft length B) grip weight C) total shaft weight relative to the head.
Best,
Matt
Hi Matt,
I was fitted for the new TM SIM and they were limited in a higher launching shaft ( Their version of Ventus Blue was the offering). They do offer as an up-charge the Pro 2.0 and wanted your opinion on if worth the $50 and how it compares.
Thanks,
Scott
Scott,
We have a full Ventus review here: https://pluggedingolf.com/fujikura-ventus-shaft-review/
As to whether or not the $50 is worth it, that depends on whether it gives you more distance or accuracy. If you weren’t able to test it first, I certainly wouldn’t pay for it.
Best,
Matt
Are both the pro 2.0 and tour spec counterbalanced? The comments here are a bit confusing. Is it counterbalanced like the Tensei orange and/or fuji six xlr8? Would you say the pro 2.0 x-stiff would be very similar to the pro 2.0 tour spec stiff shaft? Thanks!
So I bought the TS 7 XS pro 2.0 and inch short as a Black Friday experiment to test a shorter shaft. Compared to my Pro 63g xs, I am more consistent but significantly shorter. I am also thinking I have lost some swing speed when I was first got with the pro 63. In your opinion, to get more help from the shaft would you recommend going down in flex of the TS or get the same flex in the non TS version? My SS hovers between 102-110 and I am unable to see my fitter.
Randy,
Do you know why you’re shorter with the TS?
-Matt
Matt,
I think it’s a combo of mishits (heel side) and maybe swing weight (although I did at 19g to the head to get is a little heavier to flex the shaft). The shaft almost feels boards and I just can’t figure out what is going on. I am a high spin player gaming a epic flash SZ at either 8 or 9 deg of loft.
Randy,
It sounds like you’ve got a lot of variables moving at once, so I’d just be guessing. I would suggest changing one thing at a time until you find the right combo.
-Matt
Hello Matt, I hope your well.
I currently use Hzrdous Smoke Green 6.5 60g. Shaft and I’m interested in the Pro Tour Spec 2.0 driver shaft in 6x or 7x. What do you think would be the differences and similarities with the two shafts. My local store doesn’t have the Tour Spec to try out unfortunately.
Thanks,
E.
Ehren,
It’s been a while since this review, but I can say pretty confidently that I haven’t hit anything as stiff and stout as the HZRDUS Green. No matter what you switch to, it’s going to be more active and likely launch a bit higher.
Best,
Matt
Can this shaft be used in a TaylorMade Stealth driver head? I have a stiff hazardous smoke RDX shaft, and I have to get used to using a stiff shaft, but I’m better using a regular shaft. I appreciate anyone’s input.
Neil,
Yes, you just need to install a TM adapter. Very easy.
Best,
Matt